Top Panel
Sunday 19 Aug 2018
  • Increase font size
  • Default font size
  • Decrease font size


Ask us About QRay

With QRay wellness bracelets and pendants you have greater clarity, you perform at a higher level and you feel more positive.

Antique and Estate Jewellery

Find out the value of your jewellery.

We buy gold and silver: Do you have jewellery that you're ready to part with? We sell and purchase antique and estate jewellery.

Testimonial

I brought Alderwood Jewellery 2 one side of earrings that had great sentimental value. Debbie suggested we combine them into a pendant. I wear this pendant every day and it means alot. Thank you Debbie!

Did you know we repair antique clocks?

We also repair antique clocks. Give us a call to discuss your repair needs.

Here's some helpful hints about antique clocks:

Clock hands and dial features

  • minute hands were introduced to longcase clocks c. 1663
  • matching minute and hour hands were introduced c. 1775; however, clocks were still produced with only hours hands up until around 1820.
  • seconds hands began to be commonly added to longcase clock dials in around 1780
  • dots in the minute rings of brass dials were added c. 1785.
  • phases of the moon shown on clock dials were introduced in c. 1745.
  • paper clock dials were introduced c. 1792 for use in applying to a wooden or metal backing.
  • painted dials came into general use on clock faces around 1800.
  • signatures on a clock's dial or movement can sometimes help to date a clock if you can find the maker’s name and date of activity listed in one of the many guides to watch and clockmakers. However, a signature may refer to someone other than the clockmaker. 19th century retailers and distributors often put their own names on clocks as an attempt to ‘brand’ their product. The actual movement may have been made by someone else. Until the 19th century clock cases were almost always made separately from the movement and are rarely signed. Of course, a signature may be fraudulently added as an attempt to enhance a clock’s value.
 

Library Clock by James McCabe, London. c1810

The ebonized case has glazed doors to the front and rear and a beveled glazing to the raised top. There is fish scale brass fretwork to each side with green silk backing. The case has clean lines with decorative molding under the freeze and an ogee molding above the plinth.



Artwork: equanimity of mind

Painting by Toronto artist Daniel Schneider

Case and movement features

  • gold electroplating was introduced in 1836 and became popular within a few years. It provided a safe alternative to the hazardous use of mercury in gilding metals, which was banned c. 1799.
  • calendar movements were introduced to English longcase clocks c.1660.
  • machine made wood screws were introduced as early as 1806 in France.
  • reverse-painted glass tablets date from the early 1800’s.
  • wooden movements were generally used in early American shelf clocks until around 1820, since up until then hand cast and finished brass movements were very expensive. Chauncy Jerome began manufacturing cheap 30-hour brass movements in the 1830’s; by the early 1840’s brass movements virtually replaced wooden ones.
  • coiled wire gongs were used in English bracket (shelf) clocks beginning around 1840
  • chime bars, also called chime rods, were introduced to clocks c. 1890. They are metal rods specially tuned to produce a sequence of chime notes when struck by the movement's chime hammers.
  • celluloid was patented in 1869. "Adamantine" celluloid veneer was patented in 1880. In 1882 Seth thomas introduced clock models in Adamantine veneer finishes which mimiced marble, slate, wood grains and other materials. More information and examples of Adamantine clocks can be found at Bill Stoddard's ClockHistory.com web site
  • Bakelite (an early nonflammable, moldable plastic) was invented by a Belgian born scientist Dr. Leo Baekeland, who founded the Bakelite Corporation around 1910. It reached its height of popularity in the 1930's and 40's and was used in a wide variety of consumer products. Examples of clocks with Bakelite cases can be seen at Mike Schultz's Reverse Time web site.
  • marking the country of origin was required after 1896 on clocks imported to the United States; e.g. "Made in England" or England", "Made in France", "France", etc.
  • The "Anniversary" trademark on 400-Day clocks was introduced 1901.
  • Plywood was first used in 1905.

At Alderwood Jewellery & Watches we're glad to answer any questions you might have!
Call us at 416.255.4429

Alderwood Jewellery & Watches
856 Browns Line
Etobicoke, Ontario
M8W 3W2
Tel: 416.255.4429
Fax: 416.255.8483
This email address is being protected from spambots. You need JavaScript enabled to view it.

Hours:
Sun-Mon Closed
Tue 11:30am-6pm
Wed-Fri 9am-6pm
Sat 9am-2pm